Assist. Prof. Svetoslav E. Anachkov, Ph.D.
s.anachkov@lcpe.uni-sofia.bg
+359 2 8161 436
Interests
  • Surface Forces in Colloidal Dispersions
  • Micellization and Self-Assembly
  • Nanoparticle Synthesis and Ordering
Publications
Most recent publications
S. E. Anachkov, G. S. Georgieva, L. Abezgauz, D. Danino, P. A. Kralchevsky
Langmuir 2018
34
4897 - 4907
Show Abstract

Here, we have investigated the synergistic growth of long wormlike micelles and their transformation into disklike micelles, which occurs in three-component solutions composed of sodium lauryl ether sulfate (SLES; anionic), cocamidopropyl betaine (CAPB; zwitterionic), and dodecanoic acid (HC12; nonionic). The solution rheology is characterized in terms of zero-shear viscosities and characteristic times for micellar breaking and reptation. Furthermore, the microstructure evolution, leading to the observed rheological behavior, is revealed by cryo-transmission electron microscopy (TEM) micrographs. In all cases, the CAPB-to-SLES ratio is fixed, whereas the fatty acid concentration is varied. At a certain HC12 concentration, the solution viscosity passes through a maximum. The cryo-TEM imaging indicates that wormlike micelles appear before the peak, grow further up to the peak, and finally transform into disklike aggregates (a very rare micellar structure) after the peak. The transformation of worms into disks leads to a drop in viscosity because the length-to-thickness aspect ratio of the disks is significantly lower than that of the worms. In this article, we elucidate the structure-rheology relations in micellar solutions that might be applied for the design of personal-care and household formulations.

S. E. Anachkov, I. Lesov, M. Zanini, P. A. Kralchevsky, N. D. Denkov, L. Isa
Soft Matter 2016
12
7632 - 7643
Show Abstract

Microparticle adsorption and self-assembly at fluid interfaces are strongly affected by the particle three-phase contact angle . On the single-particle level, can be determined by several techniques, including colloidal-probe AFM, the gel-trapping technique (GTT) and the freeze-fracture shadow-casting (FreSCa) method. While GTT and FreSCa provide contact angle distributions measured over many particles, colloidal-probe AFM measures the wettability of an individual (specified) particle attached onto an AFM cantilever. In this paper, we extract for smooth microparticles through the analysis of force-distance curves upon particle approach and retraction from the fluid interface. From each retraction curve, we determine: (i) the maximal force, Fmax; (ii) the detachment distance, Dmax; and (iii) the work for quasistatic detachment, W. To relate Fmax, Dmax and W to we developed a detailed theoretical model based on the capillary theory of flotation. The model was validated in three different ways. First, the contact angles, evaluated from Fmax, Dmax and W, are all close in value and were used to calculate the entire force-distance curves upon particle retraction without any adjustable parameters. Second, the model was successfully applied to predict the experimental force-distance curve of a truncated sphere, whose cut is positioned below the point of particle detachment from the interface. Third, our theory was confirmed by the excellent agreement between the particle contact angles obtained from the colloidal-probe AFM data and the ensemble-average contact angles measured by both GTT and FreSCa. Additionally, we devised a very accurate closed-form expression for W (representing the energy barrier for particle detachment), thus extending previous results in the literature.

G. S. Georgieva, S. E. Anachkov, I. Lieberwirth, K. Koynov, P. A. Kralchevsky
Langmuir 2016
32
12885 - 12893
Show Abstract

The synergistic growth of giant wormlike micelles in ternary mixed solutions composed of an anionic surfactant (sodium laurylethersulfate, SLES), a zwitterionic surfactant (cocamidopropyl betaine, CAPB), and octanoic acid (HC8) is studied. Rheological data and their analysis in terms of Cole-Cole plots and micellar characteristic times are presented, and the micellar structures behind the observed rheological behavior are revealed by cryo-TEM micrographs. The surfactant composition is fixed near the maximal micelle size of the binary SLES + CAPB system, whereas the concentration of HC8 is varied. At a given HC8 concentration, the viscosity of the ternary micellar solutions exhibits a very high and sharp peak. Polarized-light optical microscopy indicates that all investigated solutions are isotropic rather than liquid-crystalline. The cryo-TEM imaging shows complex phase behavior: wormlike micelles to the left of the peak, giant entangled wormlike micelles at the peak, and long wormlike micelles coexisting with multiconnected micellar aggregates to the right of the peak. The formation of multiconnected micelles leads to a drop in viscosity at the higher concentrations. The results contribute to a better understanding of the structure-rheology relations in micellar surfactant solutions and could be useful for controlling the properties of formulations in personal-care and house-hold detergency.

S. E. Anachkov, S. Tcholakova, D. T. Dimitrova, N. D. Denkov, N. Subrahmaniam, P. Bhunia
Colloids Surf. A 2015
466
18 - 27
Show Abstract

Linear alkyl benzene sulfonates (LAS) are among the most important industrial and house-hold surfactants. Here we study the LAS adsorption properties at oil-water interface in the presence of divalent counter-ions (Mg2+ and Ca2+). Interfacial tension data are obtained and interpreted using a detailed thermodynamic model for surfactant adsorption, which explicitly accounts for counter-ion binding (Kralchevsky et al. Langmuir 15 (1999) 2351). The obtained results show that the hardness ions (i) reduce very significantly the area-per-molecule in the adsorption layer; (ii) reduce strongly the magnitude of the negative surface potential, neutralizing almost completely the adsorbed LAS molecules; (iii) bind strongly to the adsorption layer via both electrostatic attraction and specific attraction of magnitude around 3.5kT. The limiting area-per-molecule at oil-water interface is shown to be significantly larger than the respective area at air-water interface. The latter result indicates that the oil molecules are able to intercalate in between the surfactant molecules in the adsorption layer and, thus, to disrupt the molecular packing at the oil-water interface.

See all

Choose featured publications

Publications

Create a new publication